This product was manufactured by Keysight or one of its predecessors many years ago. We provide this page to assist you in using or replacing your product. The Boat Anchor Manual Archive Path: /hp/a/. This is the BAMA archive. These manuals are available for download and free of charge. I am now accepting. Agilent / HP A – Click here for a larger image Click here for larger image the HP A display range, function and HP-IB status during remote operation.
|Published (Last):||27 August 2006|
|PDF File Size:||3.2 Mb|
|ePub File Size:||6.25 Mb|
|Price:||Free* [*Free Regsitration Required]|
Self Test Operation Ohms feature of the A the A’s Ratio feature. The manjal of the trained personnel. We will respond to any relevant inquiries as fast as possible. It had narrow package, so pin socket fixed up from two pin IC sockets was installed into intermediate adapter.
Relay KlO3 a each having its own numbering sequence.
The loop is performed again. U12 pin 4 on A30 board was carefully desoldered and bent over PCBso this output clock signal can enter clock division circuit.
Providing the finest test equipment solutions since 1992
If the voltage is manuxl or noisy, do the following: Oefective ranges ranges, dependent on the defective FET. If the A is noisy or jumpy, do the following: The computer reads data from the meter and stores it in simple variable V.
The A is set to its “turn on” state. This amount is subject to change until you make payment. A 5 count loop is set up. Status Bit 1 10 3.
Disclaimer Redistribution and use of this article or any images or files referenced in it, in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Main outguard processor is also handing keyboard processing, display operation and math functions for received data, as well as provide digital interface to computer via GPIB.
If you wish to perform an addition, 0. Blue graph is measured voltage, black line is averaged value out of samples and brown line is internal or external for HPA temperature. They where changed to improve the He said that there is about 1uV of voltage change for 1uA of current change. Change R21 from 9. For additional information, see the Global Shipping Program terms and conditions – opens in a new window or tab. Page 22 Can store up to most recent readings.
HP 3456A Manuals
Moment of truth… Powering on meter, same problem and chaotic operation. Calibration of the HP A is fast and convenient since all routine adjustments are accessible from a concealed door in the front panel. Results in the end of this article were achieved after all these improvements completed and installed.
The checksum for a good binary ROM image is manuwl Instrument Serial Number with any applicable notes, and provides the following: Page Model A Service Try this by using the set up in to measure the contact resistance of a relay. HP no longer supports the A and parts are no longer available. Latest Kb was used, downloaded from rfscientific.
| HP A digital voltmeter restoration
Learn more – opens in new window or tab. This is done for two reasons: For warranty service or repair, this product must be returned to a service facility usrs by -hp. Enter text from picture: Reading the A’s Output Data This microprocessor-based, fully guarded, integrating Digital Multimeter is designed for bench or systems.
Service Model A Ul7a. For serial numbers A and below. Skip to main content. IC socket was soldered on PCB in a way, so pin 16 fits pin 12 of original ROMso we get data bus and some address uders match original layout.
Page RMS Converter. If “0” is output, the switch is set to REAR Please enter 5 or 9 numbers for the ZIP Code. Rundown uses four differem slopes to achieve highly accurate measurements of the residual voltage 4 is the within a short time.
HP A Digital Voltmeter Introductory Users Guide P/N | eBay
Turn the A On and check the following 2AP3 signatures. Model A Service Chart. Would be great to have free digit, since we manage to improve stability and performance of meter, adding sense for extra resolution. If you have a better copy of any of these manuals or a manual which is not listed, and wish to share, you can upload the manual to ftp: To output the codes.
Schematics of triple zener reference is shown below:.
The Converter changes the input voltage to a dc voltage and then applies it to the Input c.