Advantages of using the ANSI/ASHRAE tracer gas test method vs. the ANSI/AIHA. Z face velocity test method for the. expressed in feet per minute (fpm) or meter per second (m/s) (ANSI/ASHRAE necessarily involving the use of a bench or a table (ANSI/ASHRAE , ). SEFA (Scientific Equipment Furniture. Association), formerly SAMA (Scientific. Apparatus Manufacturer Association). (recommended practices). ▫ ASHRAE .
|Published (Last):||17 October 2007|
|PDF File Size:||6.68 Mb|
|ePub File Size:||2.67 Mb|
|Price:||Free* [*Free Regsitration Required]|
Alternative gases to meet. A new method for quantitative, in-use testing of laboratory fume hoods.
Interpretations For Standard 110-1995
Chemical Health and Safety. Method of testng performance of laboratory fume hoods.
Tracer gas evaluations of push-pull ventilation system performance. Significance of face velocity fluctuation in relation to laboratory fume hood performance. Tracer performance testing of installed fume hoods: Ann OccupHyg ; 51 2: Massachusetts Institute of Technology. Face velocity was measured times using a thermal anemometer TA-2 model.
Laboratory fume hood performance. Taylor, Scott and Tufts Climate Initiative.
Evaluation of laoratory hoods in Tehran Water and Waste water Co. In this test, sulfur hexafluoride SF6 is applied as a tracer gas to quantitatively evaluate the performance of laboratory hoods.
J Occup Environ Hyg ; 11 1: The performance of a laboratory hood was evaluated using ASHRAE standard method at three different ventilation capacity as well ashrqe three different volumetric flow rates of injected SF 6 while a mannequin was located at the front of hood. Maupins K, Hitchings DT.
Ashrae Std Testing Laboratory Fume Hoods
American National Standard for Laboratory Ventilation. In present work, the possibility of conducting this method of hood performance test with less volume of SF 6 was investigated. Linear regression of the results was used to consider the substitution of ethylene with SF6.
Skip to main content Skip to main navigation menu Skip to site footer. Exploring the use of less environmentally damaging gases for use in tracer gas testing. Air flow was visualized through injecting low and high volume of smokes at 18 tests. 11095, Construction, Maintenance, Health and Safety. A considerable amount of sulfur hexafluoride is applied to evaluate the performance of each laboratory hood according to ASHRAE— method.
Evaluation of laoratory hoods in Tehran Water and Waste water Co. Am Ind Hyg Assoc ;59 2: Aashrae environmentally hostile characteristics of SF6 as well as its cost are the major concerns. Hitchings DT, Maupins K. The occupational exposure of the proposed hood operator to SF6 and ethylene were 4. Industrial Ventilation a manual aehrae practice for designe 27th ed.
The average and standard deviation of face velocity at hood inlet were 0. Dale T, Maupins K. The occupational exposure of a hypothetic hood operator was determined 27 times through direct reading.
Lawrence Berkeley National Laboratory. Choosing less environmentally damaging gases for fume hood tracer gas testing. Ind health ;48 1: Meanwhile, the exposure of a mannequin stationed at the front of hood was measured.
Tracer performance testing of installed fume hoods: Shahid Beheshti University of Medical Science; Application of non-dispersive infrared NDIR ashrse to the measurement of atmospheric trace gases.